Iomega 9000 Series - Manual (Page 52)

Configuring Your Computer 45
Main Menu
System Date: Use two-digit numbers to indicate month, day,
and year.
System Time: Use two-digit numbers to indicate hour, minute,
and second. Use a 24-hour clock.
Floppy Options
Press <Enter> to view or change the configuration of the floppy
drives.
Floppy A: Indicates whether floppy A is installed. This
field is for reference only.
Floppy B: Indicates whether floppy B is installed. This
field is for reference only.
Floppy A Type: This field specifies the type of the first
floppy drive, if installed. To select the floppy A type,
highlight the field and press <Enter>. Scroll up or down
through the selections in the dialog box using the
direction arrows. Press <Enter> to make your selection.
The options are None, 360 KB (5.25-inch), 1.2 MB (5.25-
inch), 720 KB (3.5-inch), 1.44/1.25 MB (3.5-inch), or
Disabled.
Floppy B Type:
This field specifies the type of the second
floppy drive, if installed. To select the floppy B type,
highlight the field and press <Enter>. Scroll up or down
through the selections in the dialog box using the
direction arrows. Press <Enter> to make your selection.
The options are the same as those for Floppy A.
Floppy Access:
Allows you to set the floppy drives to
either read/write or read only. The default is read/write.
Primary IDE Master, Primary IDE Slave, Secondary IDE
Master, and Secondary IDE Slave:
These fields report if an IDE device is connected to the system.
When selected, each of these fields brings up an identical
secondary menu for configuring the IDE device, as described
below.
3694manl.bk : 3694manl.fm Page 45 Tuesday, December 24, 1996 9:15 AM