Iomega 9000 Series - Manual (Page 15)

8 Advantage! 9000 Series User’s Manual
If you are uncertain how to connect a peripheral device, see the
documentation that accompanied it. Information on connecting
your speakers is provided in your Getting Started guide.
Connecting the Power Cord
Check that the voltage switch on the power supply is set to the
appropriate voltage: 115 V or 230 V (Figure 4). Plug one end of
the power cord into the power connector on the rear of the
computer and the other into a grounded outlet.
Figure 4. Power Connector Location
Turning the Computer On
Before turning the computer on, press the power button on the
monitor. (For its location, see the monitor’s user manual.) The
computer power button is located at the upper-right corner of
3694manl.bk : 3694manl.fm Page 8 Tuesday, December 24, 1996 9:15 AM