Iomega 9000 Series - Manual (Page 55)

48 Advantage! 9000 Series User’s Manual
Advanced Menu
Processor Type: Displays the name/type of processor installed.
This field is for reference only.
Processor Speed: Displays the speed of processor installed.
This field is for reference only.
Cache Size: This field is visible only if a secondary cache
memory module is installed. This field is for reference only.
Peripheral Configuration
Press <Enter> for the secondary menu.
Primary IDE Interface: Use this option to enable or
disable the onboard primary IDE controller. You would
want to disable this controller if you were installing a
board with an IDE or SCSI controller on it.
Secondary IDE Interface:
Use this option to enable or
disable the onboard secondary IDE controller. You would
want to disable this controller if you were installing a
board with an IDE or SCSI controller on it.
Floppy Interface:
Use this option to enable or disable the
onboard floppy device. You would want to disable this
controller if you were installing a board with a floppy
controller on it.
Serial Port 1 Address: Use this option to assign a serial
port address to port 1. The following options are
available:
Disabled
COM1, 3F8, IRQ4 (Default)
COM2, 2F8, IRQ3
COM4, 2E8, IRQ 3
COM1, 3F8, IRQ3
COM2, 2F8, IRQ4
COM4, 2E8, IRQ4
Auto
3694manl.bk : 3694manl.fm Page 48 Tuesday, December 24, 1996 9:15 AM