Iomega 9000 Series - Manual (Page 44)

Upgrading Your Computer 37
Figure 19. Installing a SIMM
6. To install a SIMM, slide it into the first empty bank and
push it back until the retaining clips snap into place
(Figure 19). Make sure the SIMM is securely in its bank.
7. If you removed any add-in boards to reach the SIMM
banks, replace the add-in boards.
8. Replace the system cover. Reconnect peripheral devices
and plug in the power cord. Turn on the system.
Upgrading the Microprocessor
The system board has a ZIF microprocessor socket for installing
an upgrade Intel microprocessor for enhanced system
performance.
To install an upgrade Intel microprocessor in the socket, do the
following:
3694manl.bk : 3694manl.fm Page 37 Tuesday, December 24, 1996 9:15 AM