Iomega 9000 Series - Manual (Page 56)

Configuring Your Computer 49
Serial Port 2 Address: Use this option to assign a serial
port address to port 2. The following options are
available:
Disabled
COM2, 2F8, IRQ4
COM3, 3E8, IRQ3
COM4, 2E8, IRQ 4
COM2, 2F8, IRQ3
COM3, 3E8, IRQ4
COM4, 2E8, IRQ3
Auto
Serial Port 2 IR Mode: Enables/disables the onboard IR
controller, if your system came configured with the IrDA
(Infrared Data Association ) feature. If your computer did
not come with the IrDA feature, this field should always
be set to Disabled.
Your computer can support either serial port 2 or the
onboard IrDA controller, but not both at the same time. If
Serial Port 2 IR Mode is enabled, serial port 2 will be
automatically disabled. However, the BIOS field will not
be updated to reflect this.
If you are attaching an infrared device, such as a remote
control, to the serial port, DO NOT enable Serial Port 2 IR
Mode: this field is for the onboard IrDA controller ONLY.
If you enable Serial Port 2 IR Mode, you will actually be
disabling the serial port you are trying to attach to.
Parallel Port Address: Use this option to assign a parallel
port address. The following options are available:
Disabled
LPT3, 3BC, IRQ7
LPT1, 378, IRQ7
LPT2, 278, IRQ7 (Default)
LPT3, 3BC, IRQ5
LPT1, 378, IRQ5
LPT2, 278, IRQ5
Auto
3694manl.bk : 3694manl.fm Page 49 Tuesday, December 24, 1996 9:15 AM