Iomega 9000 Series - Manual (Page 54)

Configuring Your Computer 47
set up a second hard-disk type unless you also have set
up a first hard-disk type.
Do not change the settings for the hard drive that came
with your computer.
Boot Options
Press <Enter> to view the boot options:
First Boot Device: Tells the system which device to first
check to find an operating system to boot from. The
options are Disabled, Floppy, Hard Disk, CD-ROM, and
Network.
Second Boot Device:
Tells the system which device to
boot from if the first boot device fails. The options are:
Disabled, Floppy, Hard Disk, and Network.
Third Boot Device:
Tells the system which device to boot
from if the first two devices fail. The options are:
Disabled, Floppy, Hard Disk, and Network.
Fourth Boot Device:
Tells the system which device to
boot from if all three of the other devices fail. The options
are: Disabled, Floppy, Hard Disk, and Network.
Num Lock: Select this field to make the Num Lock
feature either active or inactive when the system starts.
Choose On to activate the feature or Off to deactivate it.
(Default is Off.)
Video Mode: Displays the video type. This field is for reference
only.
Mouse: Reports whether the mouse is active when the
computer starts. This field is for reference only.
Base Memory: Reports the amount of base (DOS) memory
available. This field is for reference only.
Extended Memory: Reports the amount of extended memory
available. This field is for reference only.
BIOS Version: Displays the version number of the installed
BIOS. This field is for reference only.
3694manl.bk : 3694manl.fm Page 47 Tuesday, December 24, 1996 9:15 AM