JAI AD-081GE - Manual (Page 11)

AD-081GE
10
5.4. DIP switches
DIP switches are located inside the camera. When the top cover is removed, please pay
careful attention so that the boards inside may not be damaged.
5.4.1 Trigger input 75 ohms termination
Trigger input can be terminated with 75 ohms if DIP switch SW600 is selected as
described below. Factory default is TTL.
TTL 75 Ω
5.4.2 EEN output
EEN output through HIROSE 6-pin #4 can be selected TTL level or open collector level.
The selection is activated by DIP switch SW100 described below. Factory default is
TTL.
TTL OPEN
5.4.3 Video output for Auto iris lens
The output through HIROSE 12-pin #4 can be selected OPT IN 2 or Iris video output by DIP
switch SW700 described below. Factory default is OPT IN 2.
OPT IN IRIS
SW700 for lens iris
SW600 for 75 ohms
termination
SW100 for selecting
EEN output
① TTL IN 1
② TTL IN 2