JAI AD-081GE - Manual (Page 50)

AD-081GE
49
10.5. Operation Mode
AD-081GE has the following 8 operation modes and OB transfer and ROI modes.
1 Continuous Pre-selected exposure
2 Edge Pre-Select Trigger Pre-selected exposure
3 Pulse Width Control Trigger Pulse width controlled exposure
4 Reset Continuous Trigger Pre-selected exposure
5 PIV (Particle Image Velocimetry)
6 Sequence EPS Pre-selected exposure
7 Delayed readout EPS Pre-selected exposure
8 Delayed readout PWC Pulse controlled exposure
9 Smearless Effective for EPS and PWC
10 OB transfer mode
11 ROI mode
10.5.1 Continuous mode
For applications not requiring asynchronous external triggering, this mode should be used for
continuous operation.
For timing details, refer to fig. 33 through fig. 38.
To use this mode
Set function: Trigger mode Continuous
Sync mode Sync, async, High transfer rate, High
dynamic range, High S/N
Output Select 8-bit, 10-bit, 12-bit
Scanning Full/Partial
Vertical binning ON/OFF
Shutter Programmable, Exposure Time Abs,
Auto shutter
Programmable Shutter 0.5L to 792L (1L unit)
Other functions