JAI AD-081GE - Manual (Page 44)

AD-081GE
43
10.3.16 Rear Panel Indicator
The rear panel mounted LED provides the following information:
Power LED:
 Amber : Power connected – initiating
 Steady green : Camera is operating in Continuous mode
 Flashing green : The camera is receiving external trigger
LINK/ACT LED
■
Steady green : Connecting 1000Base-T：Link
 Flashing green : Connecting 100Base-T/10Base-T：Link
■ Amber : GigE Network:Act Fig.33 Rear Panel
Note: When the camera is connected to 10BASE-T, the system is not available.
10.3.17 Test signal generator
Address
Function Read/Write Size Value
0xA13C Test stream RO 4 0=OFF
4=H Ramp scale
5=V Ramp scale
6=Moving Ramp scale
DC IN/TRIG GPIO
POW ER/TRIG
GigE-2 GigE-1
1 1 8 8
AD-081GE has a built-in test signal generator. The following options are available: