JAI AD-081GE - Manual (Page 19)

AD-081GE
18
8.3. Configuring the GPIO module (register settings)
8.3.1 Input /Output Signal Selector
GPIO is used to determine which signal is assigned which terminal. For the details, please refer
to Register Map, Digital I/O, Acquisition and Trigger Control, and Pulse Generator.
Line Selector
Line Source
Line Polarity
8.3.2 12bit counter
Address Internal Name GenICam Name Access Size Value (Range)
0xB004 Counter Dividing Value ClockPreScaler R/W 4
0x000: Bypass
0x001: 1/2 Dividing
0x002: 1/3 Dividing
|
0xFFF: 1/4096 Dividing