JVC VR-N1600U - Manual (Page 122)

114
Applications
Using the Auto Detect Feature
The Auto Detect feature enables automatic detection of network
cameras.
Memo :
● When multicast packets are configured such that they do not
pass through the network equipment, such as a switching hub,
the Auto Detect of the camera may not function properly.
The [IP Information] list contains information on the IP address of
the automatically detected camera, MAC address, number of video
CH, manufacturer, and model.
1
Click [Auto Detect]
● Auto Detect starts and the camera image appears on the
screen.
2
Replace the detected camera accordingly in
sequence
● You can click the Sort button to sort the order of detected
cameras.
● There are five types of sort buttons, including Sort by [IP],
Sort by [MAC], Sort by [CH], Sort by [MAKER], and Sort
by [MODEL] buttons.
● Select the detected cameras, followed by clicking the [Up]
or [Down] button to change the order of the cameras.
● Deselect the check box of any camera that you are not
using.
Memo :
● The camera at the top of the list is used with priority.
3
Configure the analog input (VR-N900U)
● For specifying the number of channels and format of the
analog input to be used.
Note :
● If the signals of the analog camera connected to the rear panel
[VIDEO IN1 to 4] terminal are different from those in the
[AnalogInput] settings (NTSC/PAL), a message indicating
AENCODE ERROR(format)B will appear. In this case, click the
[OK] button using the mouse to hide the
AENCODE
ERROR(format) B message, followed by specifying the NTSC/
PAL selection for [AnalogInput] correctly.
● For details on how to use the mouse, refer to [Character Input
and Mouse Pointer] ( A Page 28).
4
Click [Entry]
5
Click [OK]
● The [Camera Record Setting] screen appears.
6
Click the [Close] button on the [Camera Record
Setting] screen
● The Default View is automatically created. To save this
view, change its name.
Memo :
● The Default View created by the Auto Detect feature may
change the camera placement in the view. To maintain a fixed
position, name the view and save it.
Note :
● Select ADo not detect in the future.B check box on the [Detect
Device] screen during the Auto Detect operation if you do not
want the [Detect Device] screen of that camera to appear during
subsequent Auto Detect operations. For cameras that you have
excluded from detection, you can add (
A Page 86) them again
manually at a later time.
Auto Detect Settings
(continued)
2
1
5
4
3
NR-N900U