JVC VR-N1600U User Manual
Page 47
39
Memo :
● If you have selected a camera for which an audio source has
been set on the [Camera Settings] screen of [Camera Record
Setting], the preset audio sound is being output. (
● If you have selected a camera for which an audio source has not
been specified, the most recently selected audio source will be
continuously output.
● When the recorded and live images are simultaneously
displayed, the displayed video image and audio sound may not
synchronize properly. (However, this has no impact on recording
to the system or additional hard disk.)
Ⅵ Manually Triggering an Event
To manually trigger an event, select the event in the [Event] section,
and click the [Activate] button.
Memo :
● For details on events, refer to [Camera Input/Output Port and
● Events must be defined in advance. (A Page 95)
Ⅵ Triggering Outputs
To trigger an output, select the output in the [Outputs...] section, and
click the [Activate] button.
Memo :
● Outputs must be defined in advance.
APage 98 [Specifying an Output])
APage 103 [Specifying Output During Manual Control])
Ⅵ Camera Shortcut Menus
You can right-click on one of the images from the camera to access
the shortcut menu.
Items in the shortcut menu may vary according to the configuration
of the selected camera.
[Live] Screen
Click
[Live] Screen
Click
Item
Description
A
Camera
Displays the video image of another
camera in the selected position.
B
Sound
Notifications
Temporarily mutes warning sounds.
C
PTZ Presets
Moves the camera to the preset position
you have selected.
D
Matrix
Select this option to use the Milestone
XProtect Matrix feature.
Memo :
● For details, refer to the Milestone
XProtect Matrix manual available on the
website of Milestone Systems (http://
www.milestonesys.com).
● The URL address may be subject to
changes.
E
Send
Camera
Sends images from the selected camera to
another single-camera position in an open
view.
A
B
C
D
E