JVC VR-N1600U User Manual
Page 99
91
3
Click the [PTZ Preset Positions...] button
● The [PTZ Preset Positions for Device Name] window
appears.
Note :
● When using VN-C625U/VN-C655U, the preset position cannot
be registered if electronic zoom feature of camera is functioning.
Please take note that no error message will be displayed in such
case. During PTZ preset setting, turn off electronic zoom in the
following operations to prevent registration by mistake.
● From [PTZ page] of VN-C625U/VN-C655U, set [EZoom
Limit] to
A1B. For details, refer to [INSTRUCRTIONS] of
VN-C625U/VN-C655U.
● The following configuration options are available in the
[PTZ Preset Positions for Device Name] window.
Note :
● The configurable items may differ according to the camera in
use.
A
C
B
D
[PTZ Preset Positions for Device Name] Window
Item
Description
A
PTZ View
For moving the PTZ camera to the desired
position. You can check the position on the
screen.
B
Preset
Positions
For registering, deleting and testing a PTZ
camera position.
Use preset
positions from
device
This is only applicable to cameras that
support this feature.
Select this check box to use preset
positions defined by the camera or network
encoder (IP video server).
Note :
● To import preset PTZ positions from a device, the
preset PTZ positions of this unit first has to be deleted.
Note that by doing this you will lose all information on
the preset PTZ positions in this unit.
Memo :
● In order to use preset positions from the camera or
network encoder (IP video server) on, the names of the
preset positions must contain only alphanumeric
characters (space is not allowed). Preset positions with
names that contain blank characters cannot be
imported.
Set Position
Registers the position specified in [PTZ
View] as the preset position selected in the
list.
Edit Name...
For editing the preset position name
selected in the list.
Test
For testing a defined preset position. Select
the preset position from the list, and click
the [Test] button. The result is displayed
immediately in [PTZ View].
Delete
For deleting the preset position selected in
the list.
J/K
For moving a preset position selected in the
list upward or downward.
C
Preset
Position on
Events
For specifying settings to move the PTZ
camera to a preset position when an event
occurs.
D
Patrolling
For configuring PTZ patrolling.
(