JVC VR-N1600U - Manual (Page 57)

49
10
Specify the export destination
To write data to a CD/DVD, select [CD].
11
Click [Export]
● Export begins to prepare for writing data to the CD/DVD.
12
When export is complete, connect the CD/DVD
drive to this unit
13
Press and hold the [FUNCTION] key in front,
and press [4] on the keypad
● The Burn CD/DVD screen appears.
14
Insert the media (CD-R/RW or DVD-R/RW) that
you want to write data to into the CD/DVD drive
● The space available in the media is shown in [Free Media
Space].
● The [Burn] button is enabled (operable).
15
Select the check boxes for the AVI/JPG/DB
files that you want to write to the CD from the
data list.
● The total volume of the selected data will appear in [Total
Selected Vol].
● To select all the files, click the [Select All] button.
● To deselect all the files, click the [Unsel.All] button.
16
Press the [Burn] button
● A [YES] or [NO] message asking you whether to start
writing appears. Select AYESB.
Memo :
● If no file has been selected from the data list, an error will occur.
● If the total volume of the selected data exceeds the available
memory space in the media, an error will occur.
17
When writing is complete, the following
message appears.
● To delete the temporary files, select AYESB.
● To write the same data to another CD, select ANOB.
11
[CD] Check Button
Check Box Data List
Burn CD/DVD Screen
[Erase Sel Data] Button
[Erase RW] Button
[Burn] Button