Part names and functions (vr-n1600u/e), Getting started front a – JVC VR-N1600U User Manual
Page 20
12
Front
A
[OPERATE] Button/Indicator
Switches operation on or off. Press the button to turn operation
AONB and hold down the button to turn operation AOFFB. The
indicator blinks while the recorder is starting up or shutting down.
B
[REC CONTROL] Button/Indicator
Switches the recording control mode on or off. The indicator lights
up when the recording control mode is set to on.
Press and hold the [FUNCTION] button, and press the [REC
CONTROL] button at the same time to display the menu.
Memo :
● The main menu cannot be displayed in the recording control
mode or during recording.
● The recording control mode performs recording in accordance
with the settings in the [Camera Record Setting] menu.
C
[SELECT] Button/Indicator
Use the S key to set to the camera selection mode. The indicator
lights up when the camera selection mode is set to on. (
D
[PTZ/PRESET] Button/Indicator
Switches between the PTZ mode and PRESET mode of the S key.
The mode changes each time the button is pressed. The indicator
lights up when PTZ mode is selected and blinks when PRESET
mode is selected.
E
[SERIAL] Terminal
For connecting the communication control terminals on a mouse
(sold separately), flash memory (sold separately) or UPS (sold
separately).
Memo :
● Use the [SERIAL1 to 4] port on the rear panel for additional hard
disk drive connection. (
Note :
● Attach the serial port cover supplied with this product if this port
is not in use.
● This product may malfunction due to the presence of static
electricity. Remove any static before starting operation.
F
Status indicators
Ⅵ [WARNING] Indicator
Lights up when an error occurs. (
Press and hold the [ALARM CLEAR] button to turn off the light.
Ⅵ [ALARM] Indicator
Lights up when an alarm is activated.
Goes off when the [ALARM CLEAR] button is pressed.
Ⅵ [HDD] Indicator
Lights up when the built-in hard disk drive is accessed.
Ⅵ [LOCK] Indicator
Lights up when operation is locked. (
G
[FUNCTION] Button
Press the [FUNCTION] together with another button to use the
corresponding features.
[Special Key Operations] (
H
[SEARCH] Button
Displays the date and time search screen when in the playback
mode. (
I
[KEY] Button
When [KEY] button is pressed while pressing [FUNCTION] button,
key operation on front panel will be disabled. (Key locked mode)
To disable, perform same procedure again.
Press to display or hide the
Asoftware keyboardB.
Memo :
● Use the software keyboard to input characters. (A Page 28)
J
[ALARM CLEAR] Button
Clears the [ALARM] display when an event occurs or motion is
detected. Press and hold this button to turn off the [WARNING]
indicator.
K
[REC/STOP] Button
Press to start recording in all cameras. (When the recording control
mode is turned on, recording on all cameras starts after turning off
the recording control mode. ) Press and hold down to stop
recording.
When in the recording control mode, press and hold this button to
exit the recording control mode.
Part Names and Functions
(VR-N1600U/E)
OPERATE
REC CONTROL
LIVE/BROWSE
SELECT
PTZ/PRESET
SERIAL
㧝
㧞
㧟
㧠
㧡
㧢*1/'
㧣
㧥
㧤
CANCEL
ZOOM OUT
ZOOM IN
ENTER
WARNING
ALARM
HDD
LOCK
SEARCH
FUNCTION
ALARM CLEAR
KEY
REC/STOP
STOP(PB)
PLAY
SKIP
REV
FWD
A
T
B
G
F
E
D
C
I
H
J K
M
L
O
N
P
Q
R
S