JVC VR-N1600U - Manual (Page 132)

124
Applications
Login to NVR Viewer (Continued)
2
Specify your login information in the following
fields
3
Click the [Connect] button
● The NVR Viewer screen appears after a short while.
Memo :
● If you have previously logged in to the NVR Viewer, a message
will appear asking if you want the view that was used during the
last login to be displayed. (Only when connecting from a
surveillance computer)
[Main View]:
Select this check box to restore the view that you last
used in the main window of the [NVR Viewer].
[Detached Views]:
Select this check box to display the views on the [Primary
Display] screen, multi-monitor, or floating screen.
Note :
● When you log out after reaching the maximum number of
distribution clients, you may need to wait for several minutes
before you can establish the connection again.
● When multiple computers are connected and audio sound is
played back, the sound may be distorted.
4
Set the display language according to the
country of use
A
Click the [ K] button at the top right corner of the
screen.
B
Select [Language] from the menu that appears.
C
Select the language used in your country from the
displayed submenu.
D
Click [OK] when you see a dialog box.
E
Click the [
ן] button at the top right corner to exit the
NVR Viewer.
BThe viewer will display in the selected language
during the next startup.
Connecting to a Computer
(continued)
Item Description
A Server
address For specifying the IP address and port
number of this unit. (For example, in the case
of [http://192.168.1.253:80], [:80] is the port
number.)
The port number is the number as specified
in [Server Configuration] under [Image
Server Setting]. (
A Page 77)
B Authentication For selecting one of the three types of
authentication.
Select
ABasic authenticationB.
Windows
authentication
(current user) Windows authentication. Login as the current
Windows user.
Windows
authentication Windows authentication.
You can login as a Windows user, but a user
name and password will be required.
Basic
authentication Basic authentication.
A user name and password will be required
to login to this unit.
C User name For entering the Windows user name if you
have selected
AWindows authenticationB for
the [Authentication] item B. For entering the
user name registered in the [User
Administration] item under [Image Server
Setting](
A Page 118) if you have selected
ABasic authenticationB.
D Password For entering the login password for this unit if
you have selected
AWindows authenticationB
for the [Authentication] item B. For entering
the password registered in the [User
Administration] item under [Image Server
Setting](
A Page 118) if you have selected
ABasic authenticationB.
A
C
D
B
E
F
ⅷ VR-N1600U/E
User name :vr-n1600
Password
:vr-n1600
ⅷ VR-N900U
User name : vr-n900
Password
:vr-n900
Item Description
E Remember
password Saves the password.
If you have selected
AWindows
authentication
B or ABasic authenticationB for
the [Authentication] item B, selecting this
check box enables you to login the next time
simply by clicking the [Connect] button.
F Auto-login Enables you to login automatically. Select
this check box to enable you to login to [NVR
Viewer] automatically.
[ K] Button [ ן] Button