Sanyo CL1852 - Manual (Page 63)

Unit Display and Operation Selector
Remote control receiver This section picks up infrared signals from the remote control unit
(transmitter).
Operation selector
ON position This position is for operating the air conditioner with the wireless
remote control unit.
Set the selector normally in this position.
OFF position Switch the selector to the OFF position if you are not going to use
the air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main
power switch to turn off power completely.
TEST position This position is used only when servicing the air conditioner.
CAUTION
Do not set at the TEST position for normal operation.
OPERATION lamp This lamp lights when the system is in the continuous DRY and
COOL mode.
TIMER lamp This lamp lights when the system is being controlled by the timer.
OPERATION TIMER
ON
OFF
TEST
OPERATION lamp
Operation selector
Remote control receiver
INDOOR UNIT
KS1852
TIMER lamp
IMPORTANT
Avoid using radio equipment such as mobile phones
near (within 1 m of) the indoor unit. Some radio
equipment may cause the unit to malfunction.
If the trouble occurs, disconnect power and restart the
air conditioner after a few minutes.
OPERATION lamp
Operation selector
Remote control
receiver
INDOOR UNIT
KS0951
KS1251
TIMER lamp
OPERATION
TIMER
ON
OFF
TEST
6
OI-330-06EG
oi330000