Sharp AR-651 - Manual (Page 126)

1
2
3
4
5
6
7
8
9
10
11
12
6-6
SELECTING FINISHING MODES
12
3
2
1
11 2
9 4
7 6
5 8
3 10
1 12
7 6
7 6
12
3
2
1
3 Place the original(s). Page 2-9
- When placing them in the reversing automatic document
feeder, set them by referring to the order of pages in the
illustrations above.
- When placing them on the glass, place the first page of the
originals first if MAGAZINE SORT or MAGAZINE SORT &
SADDLE STITCH is selected. If SADDLE STITCH is
selected, set them in the order of pages 12-1, (2-11), 10-3,
(4-9), then 8-5, (6-7) by referring to the illustration above
as an example.
4. MAGAZINE SORT & SADDLE STITCH MODE (BOOKLET MODE)
When the Magazine Sort mode is selected, 1-sided originals can be copied and bound like magazines
or booklets. When a finisher with a saddle stitch (optional, AR-F12) is installed, you can select the saddle
stitch mode which will automatically staple in the center of the document. LD, LT-R, A3, A4-R, B4 are
available.
* Special paper such as OHP films or labels is excluded.
* Available paper weight for saddle stitch should be in the range of 16 lb. Bond -28 lb. Bond.
1 Place paper in the drawer(s). Page 2-4
- When MAGAZINE SORT & SADDLE STITCH is selected
- When SADDLE STITCH is selected
*You can also select the Magazine Sort mode from the editing menu. Page 4-16
Example of copying a 12-page document
- When MAGAZINE SORT is selected
2 Set the paper size.
For drawer feeding Page 3-3, step 3
For bypass feeding Page 5-10, step 4