Sharp AR-651 - Manual (Page 69)

1
2
3
4
5
6
7
8
9
10
11
12
4-13
Select other copy modes as required.
6 Press the START key.
- When placing an original on the glass, perform steps 5 and
6 on page 2-3 as needed.
4 Select the type of image combination.
- Press the 2IN1 (or 4IN1 , 2IN1 DUPLEX or
4IN1 DUPLEX ) key.
5 Select the type of the original.
- Press the 1 SIDE (or 2 SIDE ) key.
3 Press the EDIT key to enter the edit menu, and press
the 2IN1/4IN1 key.
1 Place paper in the drawer(s). Page 2-4
- When using this mode in bypass copying, be sure to specify
the paper size. Page 5-10, 5-11
To make copies onto paper which is not the same size as
originals, press the ZOOM... key to enter the right menu,
and press the size you desire and the AMS key.
2 Place the original(s). Page 2-9