Sharp AR-651 - Manual (Page 59)

1
2
3
4
5
6
7
8
9
10
11
12
4-3
1 Press the EDIT key to enter the edit menu, and
press the IMAGE SHIFT key.
3 Adjust the width of the margin, then press the SET
key.
- The default width of the margin is 14mm (0.551").
- To adjust the width, press the 2mm or 30mm key to
select the desired number, then press the SET key.
2 Press the BOOK key.
6 Press the START key.
5 Adjust the width of the binding margin, then press
the SET key.
- The default width of the margin is 7mm (0.276").
- To adjust the width, press the 0mm or 30mm key to
select the desired number, then press the SET key.
- In duplex copying, margins on the back are created on the
other side of those in the front. Duplex copying Page 3-7
When Book Margin is selected, use it in conjunction with Book-Type Originals to 2-Sided Copies. Page
3-8
Providing a Bookbinding Margin
Select other copy modes as required.
*25.4mm = 1"
*25.4mm = 1"