Sharp AR-651 - Manual (Page 5)

1
2
3
4
5
6
7
8
9
10
11
12
1
PREFACE
COPYRIGHT 2002
SHARP CORPORATION
Thank you for purchasing the Sharp Digital Copier AR-651/810. This Operator’s Manual describes the
following:
• how to use the digital copier
• how to inspect and carry out maintenance on the digital copier
• how to remedy mechanical and copying problems
Before using the digital copier, thoroughly read and understand this Operator’s Manual. To ensure that
clean copies are made at all times and to keep your digital copier in optimum working order, this Operator’s
Manual should be readily available for future reference.
To ensure correct and safe use of the Sharp Digital Copier AR-651/810, this Operator’s Manual
describes safety precautions according to the following three levels of warning:
Before reading this Operator’s Manual, you should fully understand the meaning and importance of
these signal words.
Warning .. Indicates a potentially hazardous situation which, if not avoided, could result in death, serious
injury, or serious damage, or fire in the equipment or surrounding assets.
Caution ... Indicates a potentially hazardous situation which, if not avoided, may result in minor or moder-
ate injury, partial damage of the equipment or surrounding assets, or loss of data.
Note ........ Indicates a procedure you should follow to ensure the optimal performance of the digital
copier and problem-free copying.
Tip .......... Describes handy information that is useful to know when operating the digital copier.
Advice ..... Describes an operation you should follow to keep the digital copier in good working order.
User Safety
This Sharp digital plain paper copier does not produce laser radiation hazardous to the user. It is certified as
a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Perfor-
mance Standard according to the Radiation Control for Health and Safety Act of 1968.
Protective housing and external covers completely confine the laser light emitted inside the plain paper
copier. The laser beam cannot escape from the machine during any phase of user operation.
Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of the U.S. Food
and Drug Administration apply to laser products manufactured from August 1, 1976. Laser products mar-
keted in the United States must comply with these regulations.
CAUTION: Using controls or adjustments or performing procedures, other than those specified herein
may result in hazardous radiation exposure.