Sharp AR-651 - Manual (Page 156)

1
2
3
4
5
6
7
8
9
10
11
12
7-22
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
5. ADDING STAPLES (OPTIONAL) (Cont.)
6 Return the staple cartridge to its original position.
- Insert the cartridge until it is caught by the claw and fixed
with a click sound.
2 Slide out the saddle stitch unit carefully toward the
front.
7 Close the front cover of the finisher.
5 Pull out the seal holding the staples straight upward.
Saddle Stitch Unit
* Only when the saddle stitch finisher (AR-F12) is installed.
1 Open the lower cover of the saddle stitch finisher.
If the following message remains displayed, repeat the above
procedure from to .
Set staple cartridge