Sierra Raven EDGE - Manual (Page 100)

Configuration Commands
Rev 3.0B Feb.08 96
*SMTPSTATUS?
Returns the status of the last issued SMTP message
(*SMTPSEND). If no status is available 0 is returned. Once
read, the status is cleared out. The status codes returned come
from the SMTP server to which that the modem sent the
request. Unless the receiving server is not standard, they
follow the RFC for SMTP. Cannot be used with AceManager.
Example:
354 = send in progress
250 = sent ok
*SMTPSUBJ=subject
Allows configuration of the default Subject to use if one isnʹt
specified in the message by providing a “Subject: xxx” line as
the initial message line.
• subject=message subject
*SMTPUSER=user
The email account username to authenticate with the SMTP
server (*SMTPADDR) for sending email.
• user=username (maximum: 40 characters).
Note: Not required to use SMTP settings but may be required by your
cellular carrier.
Remarque :