Sierra Raven EDGE - Manual (Page 102)

Configuration Commands
Rev 3.0B Feb.08 98
*IPPINGADDR=[d.d.d.d][name]
Set the IP address or valid internet domain name for the Raven
to ping to keep itself alive (online). *IPPING must to be set to a
value other than 0 to enable pinging.
• d.d.d.d=IP address
• name=domain name
*MSCIUPDADDR=name[/port]
Modem Status Update Address ‐ where Name/Port is the
domain name and port of the machine where the modem
status updates will be sent. The status parameters of the Raven
are sent in an XML format.
• name=domain name
• port=port
*MSCIUPDPERIOD=n
Modem Status Update Period ‐ where n defines the update
period in seconds.
• n=0 : Disabled.
• n=1‐255 seconds
*NETWDOG=n
Network connection watchdog: The number of minutes to wait
for a network connection. If no connection is established
within the set number of minutes, the Raven modem resets.
• n=0 : Disabled.
• n=minutes : Default = 120 min.
*RESETCFG
Wipe the non‐volatile data in the modem. Cannot be used with
AceManager.
Caution: You may need to reactivate your modem if you erase the
non-volatile data.
*SNMPCOMMUNITY=string
The SNMP Community String acts like a password to limit
access to the modem’s SNMP data.
• string =string of no more than 20 characters (default =
public).
*SNMPPORT=n
This controls which port the SNMP Agent listens on.