Sierra Raven EDGE - Manual (Page 116)

Circuit Switch Communications
Rev 3.0B Feb.08 112
Figure 2-5: Raven: Reset button
e. Click the Exit button in Modem Doctor when the
process is complete.
4. Activate the Raven
5. Start AceManager.
Start > All Programs > AirLink Communications > AceManager 3G
> AceManager 3G
a. Click the Connect button.
Figure 2-6: AceManager
b. Select PPP.
c. Select COM1 for the Port.
d. Enter 12345 for the Password.
e. Click OK.
Figure 2-7: AceManager : Connect to Modem using PPP
6. Configure serial port speed.
a. On the left, under the GROUPS heading, select Serial.