Connecting to power – Sierra Raven EDGE User Manual

Page 30

Advertising
background image

Hardware Installation of the Raven

Rev 3.0B Feb.08

26

Antennas selected should not exceed a maximum gain of 5 dBi 
under standard installation configuration. In more complex 
installations (such as those requiring long lengths of cable and/
or multiple connections), it’s imperative that the installer 
follow maximum dBi gain guidelines in accordance with the 
radio communications regulations of the Federal Communica‐
tions Commission (FCC), Industry Canada, or your country’s 
regulatory body (if used outside the US). 

RSS‐102 (...Health Canada’s Safety Code 6 for Exposure of 
Humans to RF Fields) 

RSS‐129 (800 MHz Dual‐Mode CDMA Cellular 
Telephones) (Analogue & CDMA) 

RSS‐133 r1 (2 GHz Personal Communications)

http://www.industrycanada.ca.

Your Raven will work with most Dual‐Band PCS cellular 
antennas with a TNC connector that works in the high and low 
frequencies of the cellular technology of your modem. Connect 
the primary antenna or primary RF cable directly to the 
antenna connector on the back of the Raven.

Tip: When using a cable to an antenna placed away from the
modem, minimize the length of your cable. All gain from a more
advantageous antenna placement can be lost with a long cable to the
modem.

Connecting to Power

Your Raven can be used with either DC, available in most 
automobiles, or 110 AC, standard US wall power, with the 
appropriate power adapter. DC cables and AC adapters are 
available as optional accessories in addition to the one 
included with your Raven.

Note: When using a DC power
source (such as a car battery or
solar cell), Sierra Wireless
recommends placing a fuse (1-2
Amp) on the line close to the
power source to protect your
power source from possible
surges due to shorts or other line
issues.

The DC power cable positive lead should be connected to the 
battery or power source positive terminal. The power cable 
negative lead should be connected to the battery or power 
source negative terminal.

Advertising