Sierra Raven EDGE - Manual (Page 92)

Configuration Commands
Rev 3.0B Feb.08 88
Figure 1-4: AceManager : DNS
*DNSn=d.d.d.d
Queries the DNS addresses. Your cellular carrier provides the
DNS addresses while your modem is registering on their
network.
• n=1 or 2 : First and second DNS address.
• d.d.d.d=IP address of domain server.
*DNSUPDATE=n
Indicates whether the modem should send DNS updates to the
DNS server specified by *DNSUSER. These updates are as per
RFC2136. They are not secure and are recommended only for a
private network. In a public network, the IP Logger services
should be used instead.
• n=0 : DNS updates disabled (Default).
• n=1 : DNS updates enabled.
*DNSUSER=d.d.d.d
Sets a user‐provided DNS to query first when performing
name resolutions in the modem.
• d.d.d.d=IP address of domain server
Dynamic IP
This group includes commands specific to dynamic DNS.
Dynamic DNS allows the Raven to use a dynamic IP address
account, with an IP address that can change each time you
connect, and still allow you to use a fully qualified domain
name to contact the Raven using IP Manager running on a
server with a dynamic DNS updater.