Sony HDW-1800 - Manual (Page 109)

109
Specifications
App
endi
x
MPEG IMX playback
Video
Digital Audio (CH1 to CH4)
Processor adjustment range
Video level ±3 dB/ –
∞
to +3 dB selectable
Chroma level ±3 dB/ –
∞
to +3 dB selectable
Setup level (59.94i, 29.97PsF)
±30 IRE
Black level (50i, 25PsF)
±210
mV
Chroma phase ±30 º
System phase SYNC: ±15 µs
SC: ±200 ns
Input connectors
HDSDI INPUT BNC (1 for input)
Serial digital (1.485 Gbits/s)
SMPTE 292M
REF. VIDEO INPUT 1
BNC (2 in loop through connection)
Black burst or composite sync
0.3 Vp-p, 75
Ω
, sync negative
REF. VIDEO INPUT 2 (OPTION)
BNC (2 in loop through connection)
Black burst or composite sync
0.3 Vp-p, 75
Ω
, sync negative
AUDIO INPUT CH1/2
XLR 3-pin, female (2)
LOW OFF: –60 dBu, high impedance,
balanced
HIGH OFF: +4 dBu, high impedance,
balanced
HIGH ON: +4 dBm, 600
Ω
termination, balanced
AUDIO INPUT (AES/EBU) CH1/2, CH3/4
BNC (2)
Complies with AES-3id-1995
TIME CODE IN XLR 3-pin, female (1)
0.5 to 18 Vp-p, 10 k
Ω
, balanced
HDV IN 6-pin, complies with IEEE 1394
(option)
Output connectors
HDSDI OUTPUT BNC (3 including 1 for character
superimposition)
Serial digital (1.485 Gbits/s)
SMPTE 292M
COMPOSITE VIDEO OUTPUT
BNC (3 including 1 for character
superimposition)
1.0 Vp-p, 75
Ω
, Sync negative
SDI OUTPUT BNC (3 including 1 for character
superimpositon)
Serial digital (270 Mbits/s)
SMPTE 259M
AUDIO OUTPUT CH1/2
XLR 3-pin, male (2)
+4 dBm at 600
Ω
load, low
impedance, balanced
AUDIO OUTPUT (AES/EBU) CH1/2, CH3/4, CH5/6,
CH7/8
BNC (4)
Complies with AES-3id-1995
(CH1/2 and CH3/4 only for HDW-
1800)
MONITOR OUTPUT (L/R)
XLR 3-pin, male (2)
+4 dBm at 600
Ω
load, low
impedance, balanced
TIME CODE OUT
XLR 3-pin, male (1)
2.2 Vp-p, low impedance, balanced
S/N ratio 45 dB or more (at 3% distortion level)
Distortion 2% or less (THD 1 kHz, reference level)
Wow and flutter 0.2% rms or less
Bandwidth Y 0 to 5.75 MHz +0.5 dB/ – 2.0 dB
R – Y/B – Y 0 to 2.75 MHz +0.5 dB/ – 2.0 dB
S/N ratio 56 dB or more
K factor 1% or less
Frequency response 20 Hz to 20 kHz +0.5 dB/ – 1.0 dB (0 dB at 1 kHz)
Dynamic range 90 dB or more (at 1 kHz, emphasis on, 16 bits/48 kHz)
Distortion 0.05% or less (at 1 kHz, emphasis on, reference level (+4 dBm))