Sharp TINSE2026QSZZ - Manual (Page 14)

12
BEFORE USING THE MACHINE
TOUCH PANEL
Using the touch panel
[Example 1]
Items on the touch panel
are selected by touching
the key associated with
the item. A beep will
sound to confirm that the
item was selected and
the key will be
highlighted.
* A double-beep is
sounded when an
invalid key is touched.
[Example 2]
Keys which are grayed
out cannot be selected.
The confirmation beeps can be disabled in the
administrator settings. (See "6. SYSTEM SETTINGS
(ADMINISTRATOR)".)
The touch panel screens shown in this manual are
printed images and may differ from the actual screens.
Selecting a function
[Example 1]
Items which are
highlighted at the time a
screen appears are
already selected and will
take effect when the [OK]
key is touched.
[Example 2]
If you need to cancel a selection, simply press the key
once again so that it is not highlighted.
The key is no longer
highlighted and the
selection is canceled.
[Example 3]
When the machine is
used in copy mode or fax
mode and a special
mode is selected, a icon
will appear on the touch
panel.
JOB QUEUE
COPY
SHARP001
003 / 000
003 / 000
SETS / PROG
Beep
tone
1/13 COMPLETE
CANCEL
RIGHT
BINDING
LEFT
BINDING
OK
MULTI SHOT
1/ DUAL PAGE
COPY
MULTI SHOT
1/ DUAL PAGE
COPY
MX-M310.book 12 ページ ２００９年７月６日 月曜日 午後６時５７分