Sharp TINSE2026QSZZ - Manual (Page 19)

17
BEFORE USING THE MACHINE
1
Special papers
Follow these guidelines when using special papers.
Envelopes
Do not use the following envelopes (Misfeeds will
occur.).
• Envelopes with metal tabs, clasps, strings, holes, or
windows.
• Envelopes with rough fibers, carbon paper, or glossy
surfaces.
• Envelopes with two or more flaps.
• Envelopes with tape, film, or paper attached to the
flap.
• Envelopes with a fold in the flap.
• Envelopes with glue on the flap to be moistened for
sealing.
• Envelopes with labels or stamps.
• Envelopes that are slightly inflated with air.
• Envelopes with glue protruding from the seal area.
• Envelopes with part of the seal area peeled off.
Letterhead paper
Letterhead paper is paper with information pre-printed
at the top such as a company name and address.
• Use SHARP recommended transparency film and
label sheets. Using other than SHARP
recommended paper may result in misfeeds or
smudges on the output. If other than SHARP
recommended media must be used, feed each sheet
one at a time using the bypass tray (Do not attempt
continuous copying or printing.).
• There are many varieties of special paper available
on the market, and some cannot be used with this
machine. Before using special paper, contact a
SHARP service center.
• Before using other than SHARP recommended
paper, make a test copy to see if the paper is
suitable.
SHARP
MX-M310.book 17 ページ ２００９年７月６日 月曜日 午後６時５７分