Sharp TINSE2026QSZZ - Manual (Page 28)

26
COPY FUNCTIONS
Copying originals of mixed length (Mixed feeding)
When using the RSPF, originals of mixed length can be fed together as long as the width of the originals is the same.
To copy originals of mixed length, follow these steps:
1 Touch the [SPECIAL MODES] key.
2 Touch the key and then the
[ORIGINAL SIZE] key.
3 Select the "MIX SIZE ORIGINAL
FEEDING MODE" checkbox.
4 Touch the [OK] key.
The setting is entered and
you return to the main
screen.
The original size icon
changes to
( ) to indicate
that mixed feeding is
selected.
Automatic copy image rotation (Rotation copying)
If the originals are placed in a different orientation than the copy paper, the original image will be automatically
rotated 90
° . (When an image is rotated, a message will be displayed.) If a function is selected that is not suitable for
rotation, such as enlarging the copy to greater than 8-1/2" x 11" (A4) size or margin shift copy, rotation will not be
possible.
[Example]
• This function operates in both the auto paper select and auto image modes. Rotation copying can be disabled in
the administrator settings. (See "6. SYSTEM SETTINGS (ADMINISTRATOR)".)
2-SIDED COPY
SPECIAL MODES
ORIGINAL
SIZE
CARD SHOT
COV
AL MODES
MANUAL
ORIGINAL SIZE
AUTO
MIX SIZE ORIGINAL FEEDING MODE
OK
When copying is started in mixed feeding
mode, all originals are scanned before
copying begins.
OK
8½x11
Note
Orientation of
the placed original
Orientation of
the loaded paper Copy after rotation
Face down Face down
MX-M310.book 26 ページ ２００９年７月６日 月曜日 午後６時５７分