SINGER 10 - Manual (Page 24)

5, 6, 8, 10 Stitch Sewing Machines
Inserting a zipper
We recommend using the Zipper Foot to form an even
line of stitching close to the zipper.
Recommended settings
Stitch Selection: Straight Stitch
Needle Position:
Stitch Width:
Stitch Length: 2-5
Foot: Zipper (E)
Needle Plate: General Purpose (A)
When the zipper teeth are to the left of the needle:
* Slide the adjusting block, (1) which slides on the pin,
across to the right.
* Snap-on the foot to the left side of the pin.
(See changing snap-on presser feet).
* Check the position of the foot by lowering the needle
into the notch on the side of the foot, to ensure that it
clears the foot.
When the zipper teeth are to the right of the needle:
* Slide the adjusting block, (1) across to the left.
* Snap on the foot to the right side of the pin.
(See changing snap-on presser feet).
* Check the position of the foot by lowering the needle
into the notch on the side of the foot, to ensure that it
clears the foot.
24