Siemens SOMATOM SENSATION CARDIAC A60 - Manual (Page 20)

20
General
How to Create your own
Scan Protocols
User-specific scan protocols can be saved with the
following basic procedure:
– Register a test patient, patient position must be
head-supine.
– Select a scan protocol.
– Set the table position to 0 (either at the gantry panel,
or on the topogram routine card).
– Modify the scan protocol, change parameters,
add new ranges etc.
– Do not load the scan protocol.
– Select Edit/Save Scan Protocol in the main menu.
– Select the organ region and the scan protocol name
in the pop-up dialog. You can either use the same
name to modify the existing scan protocol, or enter
a new name.