Sharp MD-MT16H - Manual (Page 16)

15
Notes:
● If you want to use a microphone, be sure
it is a plug-in-power type microphone.
● When a plug-in-power type microphone
is plugged in, the main unit will provide
power for the microphone’s operation.
● If a different type of microphone is
plugged in, it may not operate
properly or it may cause the unit
to malfunction.
● Insert the plug firmly. If you don’t, the
recording will not be made properly.
● Use a microphone with a 3.5 mm (1/8")
diameter stereo mini plug.
● Whilst making a mic recording, do not
connect anything to the OPTICAL/LINE
IN socket on the main unit.
6
When a sound, such as a person speaking,
is picked up by the microphone, recording
will begin automatically.
● If a silence lasts for 3 seconds or
more, the recording will be paused
automatically. However, the unit will
not pause for about the first 10 seconds
after recording has started.
To interrupt a synchro recording:
Press the
06
button whilst recording.
● The Mic synchro recording mode will
be cancelled, and the unit will enter the
recording stand-by mode.
● To resume synchro recording, press the
ENTER/SYNC button again.
To stop recording:
Press the ■ /:OFF button.
■ Recording from the microphone
(Mic manual recording)
You can start recording manually (anytime
you like).
1
Put the unit in the recording stand-by
mode. (Perform steps 1 - 4 in the “Mic
synchro recording” section.)
2
Press the
06
button.
● Recording will start.
To interrupt a recording:
Press the
06
button whilst recording.
● The unit will enter the recording stand-by
mode.
● To resume recording, press the
06
button
again.
The track number will be increased by
one each time you interrupt a recording.
To stop recording:
Press the ■ /:OFF button.
* MD-MT16H FOR UK(01-21) 99.4.2, 0:57 PM 16