Remote control, Remote control part names and functions – Sanyo PLC HF10000L User Manual
Page 14
Remote Control
Part Names and Functions
!6
LIGHT button
Lights the buttons on the remote control for about 10 seconds.
t
MENU button
Opens or closes the On-Screen MENU. (pp.26, 27)
y
POINT ed 7 8 buttons
– Select an item or adjust the value in the ON-SCREEN MENU. (p.26)
–Pan the image in DIGITAL ZOOM +/– mode. (p.44)
u
LENS SHIFT button
Selects the LENS SHIFT function. (p.29)
@0
FOCUS buttons
Adjusts the focus. (p.29)
i
ZOOM buttons
Zoom in and out the images. (p.29)
!0
FREEZE button
Freezes the picture on the screen. (p.30)
!2
P-TIMER button
Operates the P-TIMER function. (pp.30, 68)
!1
KEySTONE button
Corrects keystone distortion. (pp.31, 45, 52)
q
STAND-By button
Turns the projector off. (p.25)
!7
AUTO PC button
Automatically adjusts the computer image to its optimum setting.
(pp.29, 36)
r
SHUTTER button
Closes the built-in shutter for light blocking. (pp.28, 29)
!8
SELECT button
–Executes the selected item. (p.26)
– Expands or compresses the image in the DIGITAL ZOOM +/-
mode. (p.44)
@1
IMAGE SEL. button
Selects the image level. (pp.30, 39, 47)
@2
INPUT 1, , , and 4 buttons
Select an input source. (pp.32-34)
!9
IMAGE ADjUST button
Enters the image level adjustment mode. (pp.29, 40-42, 48-50)
!3
INFO. button
Displays the input source information. (p.29)
!5
SCREEN button
Selects the screen size. (pp.43-45, 51-52)
o
D.ZOOM
button
Select the Digital zoom +/- mode and resize the image. (pp.29, 44)
14
!4
FILTER button
Scrolls the filter. (p.30)
@3
PIP button
Operates the Picture In Picture function. (p.30)
e
ON button
Turns the projector on. (p.24)
w
SIGNAL EMISSION indicator
Lights red while a signal is being sent from the remote control unit
to the projector.
@4
ON/OFF switch
When using the remote control, set this switch to “ON”.
@5
Wired Remote jack
Connects the remote control cable (not supplied) to this jack
when using as a wired remote control.
q
t
e
!4
r
!7
!9
@0
@1
!5
!6
@2
u
y
i
!8
@4
@3
@5
w
!1
!3
!2
o
!0
@
6
@6
Number buttons
Use these buttons when setting the remote control codes (p.16)
or when entering the PIN code numbers (pp. 24, 60, 64).