Sanyo PLC HF10000L - Manual (Page 38)


Computer Input
✔
Note
• Display area (H/V) cannot be selected when 480i, 575i, 480p,
575p, 720p, 1035i , 1080i or 1080p is selected in the PC
System Menu (p.35).
• When input computer signal to the projector, PC adjust
function will become available.
No parameters stored
This mode has stored parameters.
Values of Total dots, Position H,
Position V, Display area H and
Display area V.
Press the SELECT button
to store the data.
Press the MENU button
to close this dialog box.
Mode free
Store
To store the adjusted data, select Store and then press the
Point 8 or the SELECT button. Move the highlight to one
of the Modes 1 to 10 in which you want to store, and then
press the SELECT button.
To clear the stored data, select Mode free and then press
the Point 8 or the SELECT button. Move the highlight to the
Mode that you want to clear and then press the SELECT
button.
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Press the SELECT
button to clear the
stored data.
Mode free
Store
Reset