Sanyo PLC HF10000L - Manual (Page 44)

44
Adjust the screen scale and position manually with this
function.
Press the Point 8 button or the SELECT button at Custom
adj. and Custom adj. is displayed on the screen, you can
use the Point ed buttons to choose the item you want to
adjust.
Scale H/V ........... Adjusts the Horizontal/Vertical screen
scale.
H&V ................... When set to On, the aspect ratio is
fixed. Scale V appears dimmed and
becomes unavailable. Adjust Scale H,
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V ....... Adjusts the Horizontal/Vertical screen
position.
Common ............ Saves the adjusted scale to all the
inputs. Press the SELECT button at
Common to display a confirmation box.
To save the scale, press the SELECT
button at Yes. When Custom is selected,
the saved scale is used.
Reset ................. Resets the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at Yes.
✔
Note
• When no signal is detected, Normal is set automatically
and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V is
limited depending on the input signal.
Selects Digital zoom +. The On-Screen Menu disappears and
D. zoom + appears. Press the SELECT button to expand the
image size. Use the Point ed7 8 buttons to pan the image.
The Panning function can work only when the image is larger
than the screen size.
You can also enter the Digital zoom + mode by pressing the
D.ZOOM button on the remote control.
You can also enter the Digital zoom - mode by pressing the
D.ZOOM button on the remote control.
Selects Digital zoom – . The On-Screen Menu disappears and
D. zoom – appears. Press the SELECT button to compress
image size.
The projected image can be also compressed by pressing
the D.ZOOM button on the remote control.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages 32-
34) again or adjust the screen size with the D.ZOOM button.
✔
Note :
• The panning function may not operate properly if the
stored Mode in the PC adjust Menu is used (p.38).
• The minimum compression ratio is limited depending on
the input signal, when the Keystone function is working
or when the custom is selected for the screen size.
• True and Digital zoom +/– cannot be selected when
480i, 575i, 480p or 575p is selected in the PC System
Menu (p.35).
• Digital zoom +/- cannot be selected when True is
selected.
• Digital zoom – cannot be operated when Custom is
selected.
Computer Input
Custom adj.
Digital zoom +
Digital zoom –