Sanyo PLC HF10000L - Manual (Page 67)

67
Filter replacement icon appears
on the screen at a set time.
✔ Note:
• Do not reset the counter when the filter or the filter
cartridge is not replaced.
• Timer setting notifies that the filter needs replacement. To
replace the filter, use the filter control function (p.61).
Fig.1 Filter replacement icon
Filter cartridge replacement icon
appears on the screen when the filter
scroll is counted down to 0 scroll.
Fig.4 Filter cartridge replacement icon
✔ Note:
• Fig.1, Fig. 2, Fig. 3 and Fig. 4 appear at turning on and selecting
input source.
• Fig.1, Fig. 2, Fig. 3 and Fig. 4 will not appear when the
Display function is set to Off (p.53) or during “Freeze”
(p.30).
Last scroll icon appears on the screen
when the filter is down to the last
scroll.
Fig.3 Last scroll icon
This function is used to set a frequency for the filter
replacement.
Use the Point ed buttons to select Filter counter and
then press the Point 8 or the SELECT button to access the
submenu items.
Filter counter . . . Show the total accumulated time of the
filter use timer setting.
Timer . . . . . . . . . To set a timer, when the projector reaches
the time, the Filter replacement icon
(Fig.1) appears on the screen and the total
accumulated time turns red, indicating
that the filter replacement is necessary. If
the filter is out of scroll and the projector
reaches a time set in the timer setting,
Fig.2 appears on the screen, indicating
that the filter cartridge replacement is
necessary.
Filter counter reset . . When replacing the Filter cartridge, reset
the Filter counter and the Scroll remaining
(p.73).
Scrolls remaining . . . . When the filter scroll is counted down
to 1,Scroll remaining on the screen is
showing 0 scroll(s) , the last scroll icon
(Fig.3) appears on the screen. When the
filter scrollis counted down to 0, the Filter
cartridge replacement icon (Fig.4) appears
on the screen and the WARNING FILTER
indicator lights orange, indicating that the
filter cartridge replacement is necessary.
Scroll counter reset . . When replacing the Filter cartridge, reset
the Filter counter and the Scroll remaining
(p.73).
Fig.2
Press the SELECT button to select Timer and then
use the Point ed buttons to set the timer. Select
from (Off/ 400H/ 700H/ 1000H) depending on the
use environment.
Settings
Filter counter