Sanyo PLC HF10000L - Manual (Page 50)

50
Video Input
An interlaced video signal can be displayed in progressive
mode. Press the Point 7 8 buttons to change the
progressive scan mode.
Off ......... Progressive scan mode is Off.
On .......... Progressive scan mode is On.
Film ........ For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Noise interference on the screen can be reduced. Press the
Point 7 8 buttons to change the noise reduction mode.
Off ......... Noise reduction mode is Off.
On .......... Noise reduction mode is On.
✔
Note
• Progressive cannot be selected when 480p, 575p, 720p, or
1080p is selected (p.46).
• Noise reduction cannot be selected with the computer input
and when the video signal format is 1080p. (p.46).
To store the adjusted data, select Store and press the
Point 8 or the SELECT button. Use the Point ed buttons
to select one from Images 1 to 10 and press the SELECT
button.
A confirmation box appears and then select Yes. Stored data
can be called up by selecting an Image (1-10) in the Image
Mode Selection on page 47.
A confirmation box appears and then
select Yes.
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Reset
Store
Noise reduction
Progressive