Sanyo PLC HF10000L - Manual (Page 27)

7
Basic Operation
For detailed functions of each menu, see “Menu Tree” on pages 82-84.
Main Menu Sub-Menu
e Image select
For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10 (p.39).
For Video source, used to select an image level among Dynamic, Standard, Cinema, and Image 1-10 (p.47).
r Image adjust
For computer source, used to adjust the computer image. [Contrast/Brightness/Color management/Color temp./
White balance (R/G/B)/Offset(R/G/B)/Auto picture control/Advanced color/Sharpness/Gamma/Reset/Store]
(pp.40-42).
For video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color management/
Color temp./White balance (R/G/B)/Offset (R/G/B)/Auto picture control/Advanced color/Sharpness/Gamma/
Noise Reduction/Progressive/Reset/Store] (pp.48-50).
w PC adjust
Used to adjust the parameters to match with the input signal format (pp.36-38).
t Screen
For computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/Custom/Custom
adj./Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.43-45).
For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural
wide/Custom/Custom adj./Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 51-52).
q Input
Used to select an input source (Input 1, Input 2, Input 3, or Input 4) (p.32-34).
u Information
Display s the input source information: Input, H-sync freq., V-sync freq., Screen, Lamp mode, Lamp control, Lamp
interval, Lamp 1, Lamp , Language, Filter counter, Power management, Key lock, PIN code lock, Shutter
management, Remote control, SERIAL NO., and
Option control No. (p.29).
o Guide
The key operation is displayed.
y Setting
Used to set the projector’s operating configurations (pp.53-68).
i Network
See the owner’s manual of “Network Set-up and Operation”.
Main Menu
q
w
e
r
t
y
u
i
o