Settings – Sanyo PLC HF10000L User Manual

Page 55

Advertising
background image

55

Select the lamp operation when the total lighting time of a lamp

exceeds the recommended total hours of use.
Mode 1 ............ A lamp can be turned on even after

exceeding the recommended total hours of

use.

Mode 2 ............ A lamp can be turned on even after

exceeding the recommended total hours of

use. But the projector turns off automatically

after 3 minutes.

Lamp life control

Note

• Lamp mode cannot be changed for a while after turning on the

projector. Lamp needs some time to stabilize after the power
is turned on. Stored lamp mode will be active after the lamp is
stabilized.

• If Mode 2 has been selected and the projection lamp exceeds the

recommended total hours of use, the replacement icon will be
displayed at the time of power-on. Then the projector will turn off
after 3 minutes.

In 1-lamp mode, this function allows you to specify the timing of

switching between the lamps.
Off ..................... Turns off the lamp switching function

XXXXH.............. When the cumulated lighting time of the lamp

reaches the specified time, automatically uses

the other lamp. (Options: 24H, 200H, 500H,

1000H, 2000H)

Note

The projector cannot switch between the lamps at exactly the same
time as you specified. The time specified here is approximate.

Shows the selected mode (Off/User 1-5) and its status (Stored

/Free/ Adj.). User 1 and User 2 have stored default values. See

page 30 for details.

Picture in Picture

This function is used to project two images simultaneously by

placing a separate small sub screen within or next to the main

screen.

Use the Point ed buttons to select Picture in Picture and then

press the SELECT button to display a dialog box. You can also

display the dialog box by pressing and holding the PIP button on

the remote control for more than 3 seconds.

( In P in P, the larger picture is main picture, and the smaller one is

sub picture; in P by P, the left picture is main picture, and the right

one is sub picture.)

Settings

Lamp interval

Picture in Picture

Advertising