Silvercrest SBB850EDSA1-02/10-V3 - Manual (Page 7)

- 5 -
Control panel
Ạ Display
Display for
ቢ selection of the weight
(750 g, 1000 g, 1250 g)
ባ the remaining baking time in minutes and
the programmed time
ቤ the selected level of browning (light
,
medium , dark , Rapid )
ብ the selected program number
ቦ the programme sequence
ቧ the addition of ingredients („ADD“)
ạ Start / Stop
To start and stop an operation or to delete a
time-programming.
ቧ ቢ
ብ ቤ
ባ
ቦ
750g 1000g 1250g
ả
Ả
Ầ
ấ
ạ
Ấ
Ạ
To interrupt the operation, briefly press the Start/Stop
button
ạ until a signal tone sounds and the time in
the display Ạ flashes. By once again pressing the
Start/Stop button ạ within 10 minutes, the opera-
tion can be continued. Should you forget to re-start
the programme, after 10 minutes it will be automa-
tically continued.
To completely terminate the operation or to delete
a programming, press the Start/Stop button
ạ for
3 seconds, until long signal tone sounds.
ƽ
Note:
Do not press the Start/Stop button ạ if you want
to simply check the condition of the bread. You
can watch the baking operation through the vie-
wing window.
ƽ
Please note:
When pressing all buttons an acoustic signal must
be audible, unless the appliance is in operation.
Ả Level of browning (or Rapid modus)
Select the browning level or switch into the Rapid
modus (light/medium/dark/Rapid). Press the
Browning Level button
Ả repeatedly, until the
arrow is located above the desired browning level.
For the Programmes 1 - 4 you can, through repea-
ted pressing of the Browning Level button
Ả ,
activate the Rapid modus to shorten the baking
process. Press the Browning Level button
Ả
repeatedly until the arrow appears over "Rapid". A
browning level cannot be selected with the
programmes 6, 7 and 11.
ả Timer ▼ ▲
Time-delayed baking.
ƽ
Note:
Time-delayed baking cannot be arranged with
Programme 11.
IB_49385_UK_4.qxd 06.05.2010 10:37 Uhr Seite 5