Sharp AR-275 - Manual (Page 106)

FINISHER (AR-FN5)
104
OP
T
IO
N
AL E
Q
UIP
M
E
N
T
Specifications
NOTE:
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units and there may be some
deviations from these values in individual units.
Supplies
AR-SC1 staple cartridges must be used in this finisher. Staple cartridges are available from your
SHARP dealer.
Tray capacity Top tray: 100 sheets
Offset tray: 1,000 sheets (500 sheets for sizes larger than 8-1/2" x 11")
Paper size Top tray: 5-1/2" x 8-1/2" to 11" x 17"
Offset tray: 8-1/2" x 11" to 11" x 17"
Paper weight Top tray: 15 lbs. to 21 lbs.
Offset tray: 15 lbs. to 21 lbs.
Offset Approx. 1 inch
Paper sizes that can be
stapled 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17", B5,
A4, A4R, B4, A3
Stapling capacity 30 sheets (20 lbs.)
Power supply Drawn from the copier
Weight Approx. 42 lbs. (19 kg)
Dimensions Exit area: 18-33/64"(W) x 20-1/8"(D) x 21-17/64"(H)
(470 mm (W) x 511 mm (D) x 540 mm (H))
Stapler compiler: 22-11/64" (W) x 17-17/32" (D) x 4-17/64" (H)
(563 mm (W) x 445 mm (D) x 108 mm (H))