Two-sided copying, Two-sided copying from the platen glass – Sharp AR-275 User Manual
Page 28
26
MA
KING COP
IE
S
TWO-SIDED COPYING
Two-sided copies can be made by manually placing originals on the platen glass as described in the
procedure below. Fully automatic two-sided copies can be made from one-sided originals if either an
optional single pass feeder (SPF) or an optional reversing single pass feeder (RSPF) is installed. See
page 95. Additionally, fully automatic two-sided copying of two-sided originals or one-sided copying of
two-sided originals can be made if an optional RSPF is installed. See page 98.
NOTE:
The image for the second side can be rotated 180
° top to bottom to allow tablet type binding.
Two-sided copying from the platen glass
★KEY OPERATOR If two-sided copying is disabled using a key operator program, the procedure
below cannot be performed. See page 19 of the KEY OPERATOR'S GUIDE.
1
Place the first original face down on the platen glass and close the
platen cover.
2
Press the 2-SIDED COPY key.
●
The duplex copy mode selection screen will appear.