Deleting a job program, Job programs recall store delete – Sharp AR-275 User Manual
Page 64
JOB MEMORY
62
S
P
E
C
IAL FUNCTIONS
4
Select a program number from 1 to 9 using the numeric keys.
●
A screen indicating that the settings have been stored will appear and then the display
will return to the basic screen.
●
The numbers with a check mark are program numbers which already contain job
programs. If a program number containing a job program is entered, the message
"Storage number selected is already used. Replace it?" will appear to confirm the
selection. To replace an existing program with the new program, select "YES" with the
and keys and press the OK key.
●
If the existing program is not to be replaced, select "NO" with the and keys, press the
OK key, and select another register number.
Deleting a job program
1
Press the PROGRAM key.
●
The JOB PROGRAMS screen will appear.
2
Use the and keys to select "DELETE" and press the OK key.
●
The DELETE JOB PROGRAM screen will appear.
●
To cancel the job memory mode, press the BACK key or the CLEAR ALL key.
JOB PROGRAMS
RECALL
STORE
DELETE