Sharp AR-275 - Manual (Page 78)

TROUBLESHOOTING
76
COP
IE
R
TROUBLE
?
CAUTION:
Be sure to use only genuine SHARP parts and supplies.
Please contact your SHARP service center immediately if a problem persists after checking the above.
Problem Solution
Copies are smudged or
dirty. ● Platen glass or platen cover
dirty? Clean regularly. See page 84.
● Original smudged or blotchy? Use a clean original.
Black or white stripes
appear on copies. ● Is the scanning window of an
optional SPF or RSPF dirty? Clean the scanning window.
Paper size for a paper tray
cannot be set. ● Is the COPY indicator off? Press the COPY key to select the
COPY mode. See page 14.
● Is copying, printing or facsimile
printing being performed? Set the paper size after copying,
printing or facsimile printing is
complete.
Power is on but copying is
not possible. ● Are only the mode indicators
on? The copier is in the auto power
shut-off mode. Press the COPY
key or another mode key that is lit.
● Is the COPY indicator off? Press the COPY key to select the
COPY mode.
● Is two-sided printing being
performed? Wait until the printing job finishes.
Lighting fixture flickers. ● Is the same power outlet used
for the lighting fixture and the
copier? Connect the copier to a power
outlet which is not used for other
electric appliances.