Sharp AR-275 - Manual (Page 22)

20
GE
T
T
IN
G
S
T
ARTE
D
AUDITING ACCOUNTS
If this copier has been programmed in the auditing mode, it will not perform copier functions until an
assigned 5-digit account number has been entered.
★
★ ★ ★KEY OPERATOR See page 21 of the KEY OPERATOR'S GUIDE for setting the auditing mode.
How to copy in the auditing mode
If the copier has been programmed in the auditing mode, the following message will appear in the
display in place of the normal initial conditions display.
1 Enter your account number using the numeric keys.
● As each digit is entered, the dashes in the display will change to asterisks.
● After the number is entered, the following message will appear in the display.
● "REMAINING" will appear only if account limit has been set using a key operator
program.
★ ★ ★ ★KEY OPERATOR See page 24 of the KEY OPERATOR'S GUIDE for account limit.
● The message will be displayed for several seconds, then change to the following
message.
Enter your account
number.
ACCOUNT #: