Pattern 1 border 2in1 – Sharp AR-275 User Manual
Page 55
2 IN 1 OR 4 IN 1
53
3
S
P
E
C
IAL FUNCTIONS
7
Use the and keys to select a type of border line.
●
Select the solid line, broken line or no border line.
8
Press the OK key.
●
The display will return to the basic screen.
9
Make all other desired copier selections and press the START key .
●
The copy ratio will be calculated automatically.
●
If an optional SPF or RSPF is used, copying will start after originals are scanned.
●
If the platen glass is used, proceed to the next step.
10
Replace the finished original with the next original and press the
START key after it lights up. Repeat this step until all originals have
been scanned.
●
Copies will be output each time two originals for 2 in 1 copy or four originals for 4 in 1
copy have been scanned.
●
To start copying before scanning all originals for a copy (after only one original for 2 in 1
or three originals or less for 4 in 1 have been scanned), press the READ-END key.
●
Portions of original images may not be copied depending on the original and copy paper
sizes and the number of images to be copied onto a page.
●
Depending on the number of originals and the orientation of the originals and copy paper,
the image of originals may be rotated.
●
To cancel the 2 in 1 / 4 in 1 feature, select the 2 in 1 / 4 in 1 feature again and select
"OFF".
PATTERN 1
BORDER
2in1