Sharp AR-275 - Manual (Page 16)

PART NAMES AND FUNCTIONS
14
GE
T
T
IN
G
S
T
ARTE
D
Operation panel
COPY key and indicator (p. 76, 84)
Press to select the COPY mode.
Press and hold during standby or during warm-
up to display the total output count and the
quantity of toner remaining.
Mode keys and indicators
Use these keys when relevant optional
components are installed.
Display
Displays information to assist the operator.
BACK key
Press to return the display to the previous
screen.
Information ( ) key (p. 66)
Press to display the detailed description when
is displayed in the upper right-hand corner of
the display.
JOB STATUS key (p. 19)
Press to check the settings of selected functions
or the status of reserved output jobs.
OK key
Press to confirm the selected setting or entered
data.
Copy quantity display
Displays the specified copy quantity during
standby and displays the copy countdown as
copies are made.
Numeric keys
Use to select the desired copy quantity.
INTERRUPT key and indicator (p. 39)
Interrupts a copy run.
CLEAR ALL key (p. 17)
Clears all selected settings and returns the
copier to the initial settings.
START key and indicator
Copying is possible when the indicator is on.
Press to start copying.
EXPOSURE key (p. 29)
Use to select the exposure modes: AUTO,
TEXT, TEXT/PHOTO, PHOTO or SUPER
PHOTO.
PAPER SELECT key (p. 24)
Use to manually select a paper tray.
COPY RATIO key (p. 33)
Press to select a reduction or enlargement copy
ratio.