Konica Minolta 7222 - Manual (Page 101)

Stapling Output Copies (Staple) (continued)
3-39
1.
Close the RADF securely, then press [AUTO RESET].
Key Operator can change the initial output mode. See p. 13-11 to p. 13-12.
2.
Touch STAPLE on the Basic Screen to highlight it.
The staple position icon will be displayed in the OUTPUT icon area.
Using FS-114, Tray 1 will be initially selected, while the primary (main) tray will be fixed
when using FS-113.
To change the output tray or staple position, follow the procedure below.
If the staple position currently set is desired, proceed to step 4.
3.
Touch OUTPUT on the Basic Screen to display the Output Mode popup
menu.
FS-113:
Touch STAPLE twice to display the Staple Position Selection popup menu.
Select the desired staple position, then touch OK to restore the Output Mode popup
menu.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Lens Mode
Density
1-1, 2-2
2-1
Staple
Punch
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Copy Size
Fold/
Fold&Stitch
Output with
Inner Tray